Flame dropped out the moment I let go of the knob, every burner. He explained the thermocouple side of it in plain language, replaced the part, and stayed to test each burner twice before packing up.
Montgomery A. · Quincy
Fisher & Paykel · Newton, Massachusetts
Fisher & Paykel repair in Newton
The DishDrawer is the Fisher & Paykel appliance we are called to most in Newton, and the first question is always which drawer — the two halves are independent machines, and answering that rules out half the possibilities before anyone kneels down.
- Town
- Newton, 02458
- Service call
- $95, credited
- On site
- 8:00 am – 8:00 pm, seven days
- Dispatch
- Answered 24/7
The brand, in general
What goes wrong with Fisher & Paykel
The DishDrawer is two independent machines in one cabinet, and diagnosis starts by asking which drawer, because that alone rules out half the possibilities. Leaks on this design are usually the lid seal rather than anything plumbed, and the seal is a serviceable part. We keep the common ones rather than sending the customer away to wait on an order.
- One drawer failing while the other runs perfectly — two machines, not one
- Lid seal leaking at the front corner during the wash cycle
- Drawer not latching so the cycle will not begin
- Refrigerator running warm with the variable-speed compressor throttled by a control fault
Newton kitchens
Newton has more full high-end suites per street than anywhere else we cover. Sub-Zero and Wolf together in one kitchen is the default rather than the exception, and both are usually the same age.
What we repair here
- Dishwasher Repair Integrated, panel-front and drawer dishwashers.
- Refrigerator Repair Freestanding and integrated refrigeration across every brand we carry.
- Built-In Refrigerator Repair The 36 to 48 inch built-ins that a kitchen was designed around.
- Cooktop Repair Gas, induction and downdraft cooktops.
What people said afterwards
4.9out of 5
from 1,415 reviews across Greater Boston
Cubes formed perfectly and then just sat there. He said forming fine but never releasing points at the harvest side rather than the water valve, and it was the mould heater. Booked Tuesday, fixed Wednesday, ice on Wednesday night.
Peregrine J. · Boston
Twenty two years old and I had been told by someone else it was finished. He cleared a condenser that had never been touched, replaced two hardened gaskets, and it has held temperature since. Honest about what was worth doing and what was not.
Barnaby F. · Wellesley